[Released]Nissan Skyline R34 GT-R

[James]

nice mod, I may make one like the ones over in Japan (assumeing the police still use this car over thier)...unless one is already in the works!

[zipppy]

I made a Skin pack for this car. I'll work on the texture bugs a little later.


EDIT : I'll make more skin variations, any ideas anyone?



EDIT 2 : I found a real cop skyline through Google. I'll replicate it.

Link to picture : http://commons.wikimedia.org/wiki/Image:Japanese_NISSAN_SkylineR34_GTR_police_car.jpg

[James]

I made a Skin pack for this car. I'll work on the texture bugs a little later.


EDIT : I'll make more skin variations, any ideas anyone?



EDIT 2 : I found a real cop skyline through Google. I'll replicate it.

Link to picture : http://commons.wikimedia.org/wiki/Image:Japanese_NISSAN_SkylineR34_GTR_police_car.jpg

uhhhhh...I think we have the same thought process...thats the picture i was planning on useing to make the Japanese cop version...

as well as a few others...
http://www.autoartmodels.com/images/photo/1_18/77351.jpg

Ok i know this isnt a skiline R34 (its the 32 model) but the back end is basicially the same as the R34 series...

http://www.ne.jp/asahi/rjoo/area88/images/skyline3-04.jpg

[zipppy]

The last Image doesn't really look like an R32 Skyline but, It looks like an R34 to me.

[James]

The last Image doesn't really look like an R32 Skyline but, It looks like an R34 to me.

well thats the good thing the R32 and 34 are really close to each other (other then when they were made and maby a few very small cosmetic things...so it could be either or.

[Psygo]

I should have said this a long time ago: This car is right hand drive... you can't get it left hand drive. And Zipppy, could you make a purple with some vinyls on the side?

[sten]

dont forget the steeringwheel,what most be at other side

[Psygo]

dont forget the steeringwheel,what most be at other side

That was what I just said..

[sten]

yes,
i didnt saw it first time.

[Silent_alarm]

well thats the good thing the R32 and 34 are really close to each other (other then when they were made and maby a few very small cosmetic things...so it could be either or.

That is R34. R32 has round tail lights too but they are both same sized, where r34 has smaller lights inside and bigger outside. and R33.. Well it has actually 3 tailights.
Have a look...

(Yes, i'm GT-R enthusiast...)

R32
http://upload.wikimedia.org/wikipedia/commons/thumb/9/9f/Nissan_Skyline_R32_GT-R_002.jpg/200px-Nissan_Skyline_R32_GT-R_002.jpg

R33
http://upload.wikimedia.org/wikipedia/commons/thumb/d/d6/Nissan_Skyline_R33_GT-R_002.jpg/800px-Nissan_Skyline_R33_GT-R_002.jpg

R34
http://www.supercar-wallpapers.com/Wallpapers/Nissan/Nismo_Skyline_GT_R34_Ztune/Nismo_Skyline_GT_R34_Ztune_1280x1024.jpg

R34 Jap. Copcar
http://en.wikipedia.org/wiki/Image:Japanese_NISSAN_SkylineR34_GTR_police_car.jpg

Even though they seem to be quite same cars and have lot in common, they are really different cars. where r32 was lightest AWD GT-R with 1430kg and R34 had hefty 1540kg, r33 placed in middle with 1530kg. R33 and R34 shared basically same body so R34 is usually considered as "facelift" where R32 has differend body and it weights less. The newer the models (R33 & R34) also have better gearbox that can handle a bit more powerabuse and some other minor upgrades. R32 is known for stock gearbox troubles when going over 600hp as it may get stuck on 3rd gear. They're all Japanese GR. A Homologation models, so they had to have strong components as GR. A was for "stock cars", and the gearbox(and almost all engine parts) had to be exactly same on racecar as on-road model.

[Isaac.Eiland-Hall]

This has now been released

I would like to release a mod for this, so I'm seeking permission from you.

[zachtank]

I would like to release a mod for this, so I'm seeking permission from you.

I'm just.... Speechless. The lightbars an- and the vehicles... Dude, it's awesome! Very nice work!

[Isaac.Eiland-Hall]

Thanks!

It was actually pretty easy...

Rough guide:
1. Use new autouid at http://rigsofrods.com:8080/ to make a clean copy
2. Open skin in Photoshop and color->white (not completely trivial on the Strider, but easy on the Skyline)
3. Open truck file in editorizor to get roof nodes
4. Ref/X/Y would be front-right, rear-right, and front-left
5. copy lightbar from another car so I can get the position right
6. put in beacons, spread out across the right axis

Yeah, it's a little more work than that, but that's really it. Took me about 15 mins or so for each of the two...

[Psygo]

I would like to release a mod for this, so I'm seeking permission from you.

This isn't mine I just requested it a loooooooooooooooooooooong time ago.

[zachtank]

Thanks!

It was actually pretty easy...

Rough guide:
1. Use new autouid at http://rigsofrods.com:8080/ to make a clean copy
2. Open skin in Photoshop and color->white (not completely trivial on the Strider, but easy on the Skyline)
3. Open truck file in editorizor to get roof nodes
4. Ref/X/Y would be front-right, rear-right, and front-left
5. copy lightbar from another car so I can get the position right
6. put in beacons, spread out across the right axis

Yeah, it's a little more work than that, but that's really it. Took me about 15 mins or so for each of the two...

The beacon are so awsome! I'm gonna love pulling people over in this bad-boy.

[raz]

i know who he will be pulling over in mp 

[zachtank]

i know who he will be pulling over in mp 

These are going to be great for that.

[raz]

i am going to need to practice to get away now 

[Akoss]

I'm not was ath home for 3 days. I like the car, its looks awsome, ahh and Isaac u got the permisiion

[Aleixo]

I love the GT-R is soo pretty

[navarra]

hydraulics are kool, the skyline light are great and best of all it's very fast

[Blazer425]

I love this car. I added power and upped the redline to simulate a racing version. It drifts beautifully. I'm modifying a mesh from the sketchup warehouse to work, but I found lots of problems with the mesh so it might be a while until you see it in screenshots.

[Akoss]

I love this car. I added power and upped the redline to simulate a racing version. It drifts beautifully. I'm modifying a mesh from the sketchup warehouse to work, but I found lots of problems with the mesh so it might be a while until you see it in screenshots.

I can help u in the mesh, just send me the model, PM me for e-mail.

[Funnay]

Here's a new skin for the car


Authors:
Me for the skin

Akoss for the car

Sorry for i dont have attached a pic, i dont know how to do it...

[Ladee]

Sorry for i dont have attached a pic, i dont know how to do it...

The same way as you attached your zip package